Optoelectronics Whitepapers

Realizing maximum system level benefits with High-Voltage DC LEDs

The improving performance and falling prices of light emitting diodes (LED) has led to a wider consumer acceptance of LEDs in the global market for commercial...

Using shift registers to reduce size and BOM in LED designs

Shift registers can help reduce size and BOM in designs that use LEDs. By providing I/O expansion, they enable the use of smaller, less expensive microcontrollers....

Published: Oct 14, 2022

Evaluating GUI Design Software

If you’re in need of an interactive screen, you have likely searched the internet and found your way to the term “GUI”, short for graphical...

Key Considerations for Powertrain HIL Test

Safety, availability, and cost considerations can make performing thorough tests of embedded control devices using the complete system impractical....

Reduce Load Capacitance in Noise-Sensitive, High-Transient Applications, through Implementation of Active Filtering

The following white paper uses a typical off-the-shelf isolated DC-DC converter to demonstrate how an active filter will not only provide superior filtering,...

SubLVDS to MIPI CSI-2 Image Sensor Interface Bridge Soft IP

Many Image Signal Processor (ISP) or Application Processors (AP) use the Mobile Industry Processor Interface (MIPI® ) Camera Serial Interface 2 (CSI-2)...

Computer-on-Module: selecting the right form factor and processor

When it comes to Computer-on-Module (COM) solutions for embedded computing applications, selecting the right form factor and processor for the application...

Published: Nov 25, 2021

White paper: Fundamentals of Radome and Bumper Measurements Using the R&S®QAR

New technologies in the automotive industry depend on how well the vehicle can interpret the surroundings. High-quality cameras are used to detect and...

Enhanced Short Circuit Protection for SCADA/RTU Systems with Remote Reset Capabilities

The focus of this article is to address the need to utilize the latest circuit protection technology available to increase the effi ciency of a battery...

XMOS Timing Analyzer Whitepaper

To guarantee the correct behavior of real-time software running on embedded processors can pose a significant challenge. Data-dependent control flow, where...

Medical Display

Medical displays specialize in reproducing clear images with high brightness and contrast while maintaining color accuracy. In recent years, there has...

Motion Processing: The Next Breakthrough Function in Handsets

Motion processing is emerging as the only solution that can deliver a new user interface and experience that will make a specific mobile handset stand...

Published: Feb 10, 2023

Embedded GUI Predictions 2023-2024

Looking ahead to the new year, it is clear that the embedded graphical user interface (GUI) industry is still adjusting to the radical changes caused by...

PRACTICAL LOW POWER CPLD DESIGN

Any engineer involved with portable or handheld products knows that minimizing power consumption is an absolute requirement for today’s designs....

Optoelectronics

Realizing maximum system level benefits with High-Voltage DC LEDs

Using shift registers to reduce size and BOM in LED designs

Evaluating GUI Design Software

Key Considerations for Powertrain HIL Test

Reduce Load Capacitance in Noise-Sensitive, High-Transient Applications, through Implementation of Active Filtering

SubLVDS to MIPI CSI-2 Image Sensor Interface Bridge Soft IP

Computer-on-Module: selecting the right form factor and processor

White paper: Fundamentals of Radome and Bumper Measurements Using the R&S®QAR

Enhanced Short Circuit Protection for SCADA/RTU Systems with Remote Reset Capabilities

XMOS Timing Analyzer Whitepaper

Medical Display

Motion Processing: The Next Breakthrough Function in Handsets

Embedded GUI Predictions 2023-2024

PRACTICAL LOW POWER CPLD DESIGN

More Optoelectronics Topics

Site Map

Contact Us